Skip to main content

Full text of "Sewing"

See other formats


Guitar Bag 



MakejProjects 

hhiiilH ho/ 1 !/ tuMaal/ chare r\icf*f\\tat* 



build, hack, tweak, share, discover,- 



Guitar Bag 

Written By: Meream Pacayra 



TOOLS: 



PARTS: 



Computer (1) 

Measuring tape (1) 

Printer (1) 

that can print legal-sized paper. 

Scissors (1) 

Sewing machine (1) 



Fabric (1) 

in 2 or 3 colors, for the body, pickguard. 
and lining, metallic silver fabric for the 
bridge and input jack. 

Buttons (3) 

for the tone and volume controls. They 

should match the pickguard fabric. 

Thread (1) 

silver embroidery thread for the screws 

Black wedding (1) 
for the strap. 

Strap adjuster (1) 
for the strap. 

Bias taped) 

or the single-coil pickups, the color 

should match your fabric for the 

pickguard. 

Interfacing (1) 

Paper (1) 

• Pins (1) 



© Make Projects 



www.makeprojects.com 



Page 1 of 5 



Guitar Bag 



Tailor's chalk (1) 

Velcro(1) 

or magnetic snap. 



SUMMARY 

There are countless ways to show your personality through crafts. It's easy to create 
beyond the traditional and come up with something truly unique. Instead of sewing a bag that 
can simply carry your stuff, you can come up with something that reflects who you are. This 
guitar bag does just that. Not only does it shout to the world that you have rocking sewing 
skills, it also shows that you rock, be it as a genuine or wannabe rock star. 

With an endless array of colors to choose from, you can even express what kind of music 
you're into. Whether you're a punk princess or a hardcore metal artist, you can sport this 
bag and be the envy of everyone. After all, everyone can relate to loving music. 



Step 1 — Trace your pattern. 



/ 





• Find and print an image of a Fender Stratocaster onto legal-sized paper. Don't include the 
fretboard. You'll use only the body shape as your pattern. 

• Cut out the guitar shape, and then trace the image onto your fabric. Make sure that your 
guitar body, lining, and pickguard pieces mirror each other. 

• Mark the highest points of the body and lining pieces. These are the highest points of the 
curved horns on each side of the fretboard of a real Fender Strat. 



© Make Projects 



www.makeprojects.com 



Page 2 of 5 



Guitar Bag 



Step 2 — Create the bridge and input jack. 




• Cut a small piece of interfacing, approximately 2"x1". Cover this with metallic silver fabric, 
and pin. Don't sew it! This will be your bridge, and you'll sew it directly onto the bag. 

• Draw a teardrop pattern on 2 small pieces of the same silver fabric, similar in size to your 
bridge. Sew, right sides together, and turn inside out. This teardrop piece will be your input 
jack. 

• Set your bridge and input jack aside. 



Step 3 — Sew the pickguard, bridge, and input jack onto the guitar. 



w ^^ 


J ■ 





m Pin your pickguard pieces, right sides together. Sew all the way around, leaving a 2" 
opening for turning it inside out. Before turning the pickguard inside out, clip or cut around 
it. This will nicely define the curves. Then turn it right side out. 

• Position your pickguard on the body and sew, using the image you printed for reference. 

• To position the bridge and input jack, again refer to the image you printed out. Sew them 
onto the body, using matching thread. 



© Make Projects 



www.makeprojects.com 



Page 3 of 5 



Guitar Bag 



Step 4 — Sew the single-coil pickups. 





m « 1 


r 

t V / 



• Cut three 2" strips of bias tape. Position them on your pickguard. They should be aligned 
to the bridge, except that the bias strip near the bridge should be slanting. Again, use your 
printed image as a reference. Sew the bias strips onto your pickguard. 

• Using tailor's chalk, mark 6 points on these bias tape strips and on your bridge. These 
points should also align; they're the pickup pole pieces and the bridge saddles for each 
string. Mark another 2 points on the opposite ends of your input jack, and the points near 
the edge of the pickguard where there are more screws. 

• Embroider these points with silver thread, using a backstitch or French knots. 
Step 5 — Add tone and volume controls and finish the body. 




• Sew the 3 buttons onto your pickguard as the tone and volume controls. 

• Sew the body pieces, right sides together, beginning and ending at the highest points that 
you marked. Turn the body inside out. 



© Make Projects 



www.makeprojects.com 



Page 4 of 5 



Guitar Bag 



Step 6 — Sew the lining and the strap. 




• Sew the lining, but leave a gap at the bottom. Don't turn it inside out. Before sewing the 
lining, you may choose to add velcro or a magnetic snap for the bag closure. 

• Insert the body inside the lining. Then sew the mouth of your bag by sewing the lining to 
the body. 

• Turn the bag inside out through the gap in the lining, and topstitch the opening of your bag. 

• Take a 1"-wide piece of black webbing and fashion it with an adjuster to use as a strap. 
Sew the ends of the webbing to the back of the bag's top horns. 

Step 7 — Finish your bag. 

• Sew up the gap in the lining. Attach your favorite band buttons to the strap, and you're 
ready to rock! 

• There are other ways to create your own guitar bag, and I'm sure you'll come up with great 
ideas that speak to your own uniqueness. Add a whammy bar or real guitar strap! 

• Instead of sewing the individual elements, one alternative is to print an image of a guitar on 
fabric, then stitch it up to a coordinating backside (or maybe you'll print the back of a 
guitar for that piece, too). 

This project first appeared in CRAFT Volume 10 . pages 1 19-122. 

This document was last generated on 201 2-1 1 -03 1 2:46:54 AM. 



© Make Projects 



www.makeprojects.com 



Page 5 of 5